Juan el Mecánico

P0122

Throttle/pedal position sensor/switch A circuit low input.

The electrical throttle-or-pedal position signal remained below the range expected by the computer.

What should be checked

01

Throttle or pedal position signal to inspect

The module compares position signals and can detect voltage, correlation, or response outside the expected pattern.

In plain language: The computer may be receiving a position value that is too low, too high, or inconsistent with the actual movement.

How to check it
Compare the related signals, power, ground, connectors, and travel against the exact vehicle procedure.
Before correcting it
Do not replace a sensor, pedal, or throttle body based only on the DTC. The correction is decided only after locating and confirming the defect.
Related components
This diagnostic path may involve position sensors, the pedal, throttle body, connectors, power, ground, or wiring. None is confirmed.
When to stop
Stop if the throttle moves on its own, the engine does not respond to the pedal, or the test requires actuating an electronic throttle body.

02

Throttle mechanism and control to inspect

An obstruction, irregular movement, or misadjustment can prevent commanded and measured positions from matching.

In plain language: The mechanism may not move smoothly or may not reach the position commanded by the computer.

How to check it
Record the ordered and observed position before cleaning, adapting or dismantling any component.
Before correcting it
Do not force the throttle plate or perform a generic adaptation without the correct procedure. The correction is decided only after locating and confirming the defect.
Related components
This diagnostic path may involve the throttle body, its actuator, gears, air duct, or linkage. None is confirmed.
When to stop
Unexpected acceleration, reduced-power mode, or access near moving parts requires professional attention.
Throttle or pedal position signal to inspect
The computer may be receiving a position value that is too low, too high, or inconsistent with the actual movement.

Information needed for a more precise diagnosis

  • Exact brand, model, year, version and engine.
  • All the codes present and their OBD status.
  • Freeze frame and live data related to the system.
  • Symptoms, mileage and recent maintenance history.
  • Procedure and limits of an authorised source for that vehicle.

Where to find diagrams and manuals

Manufacturer repair information directory

Choose the make and open its official portal to find the manual, diagrams, cylinder arrangement, and bulletins for the exact vehicle.

Availability, registration, and cost depend on the manufacturer. The link does not grant permission to copy the manual.

Freedom to Fix: emissions service information

Understand which emissions-related service information manufacturers must make available for purchase.

Explains regulated access in the United States; it does not contain the vehicle-specific diagram or make the manual free.

Sources reviewed

  1. Audi Q7 Quick Reference Specification Book — Audi of America / archivo NHTSA. It supports the punctual definition of the code; It does not identify a cause, a part or a repair.
  2. Frequently Asked Questions About On-Board Diagnostics — U.S. Environmental Protection Agency. Supports the safety difference between a fixed breakdown lamp and a flashing lamp; It doesn't diagnose the cause.